Waterproof experience sharing! How to do well in waterproofing the roof of rural self built houses?
For rural self built houses, doing a good job in waterproofing is very important. Due to the exposure to sunlight and rain, the roof is prone to leakage, cracking, and other issues over time. Therefore, waterproofing treatment is carried out during roof construction. If there is a problem with waterproofing, the house is likely to leak water in the future, and in severe cases, it can cause significant economic losses. Waterproof experience sharing, today we will talk about how to do well in the "roof waterproofing" of rural self built houses?
In general, there are two methods for waterproofing the roofs of rural houses: one is to pour the roof in situ, and then use rolls and waterproofing materials. There is also a common type of rain shelter currently available. Generally speaking, if a self built house uses cast-in-place roof tiles, there will be basically no leakage. The leakage is usually caused by wooden or flat roofs, with rolled materials and waterproofing, but it must be done well. Another method is to build a rain shelter on the roof. Nowadays, many rural areas have built rain shelters on the roof, with both single-layer and double-layer sandwich panels such as color steel and color aluminum being good.
Before laying the roll material, it is necessary to cut it into the appropriate size and thickness according to the actual area. The laying should be done in a bottom-up order using the rolling method. By heating the connection of the coil, it is adhered to the base layer.
It is best not to use prefabricated panels, as although this material is cheap, it has potential leakage and even safety hazards. If it is a non accessible roof, it is recommended to build a sloping roof and cover it with insulation layer and tiles. This is the best solution for once and for all, with good insulation and waterproofing effects! This is because there are many houses in rural areas that have not been roofed, resulting in rainwater pouring onto the top layer. The best way to drain water is to rebuild roofs with a certain slope like our ancestors did. Of course, repairing the roof will increase the budget. In addition, roof waterproofing is best done in one go. After construction, waterproof paint should be applied to ensure waterproofing performance, especially in terms of corrosion resistance. Joint sealing products can be used to make roof waterproofing more durable. Waterproofing and insulation are closely related to building roofs.